We are busy adding new products so be sure to check back regularly! If the product you are looking for doesn't appear yet please give us a call on 012 329 2259 and we'll be happy to assist!

Bond & Seal 300ml Black

Bond & Seal 300ml Black

Regular price
R 195.00
Sale price
R 195.00
Unit price
per 
Tax included.

Technical information


Contents - 300 ml
Container - Cartridge
Colour - White/Black
Chemical basis - Single component polyurethane
Min./max. skin-formation time/conditions - 45-60 min / at 23°C and 50% relative humidity
Full curing speed/conditions - 3 mm/d / 23°C and 50% relative humidity, moisture curing
Shore hardness A/conditions - 40 / nach DIN 53505
Density/conditions - 1.25 g/cm³ / prior to hardening, DIN 53479
Shore A hardness - 40
Min. tensile strength -1.8 N/mm²
Conditions for tensile strength - in accordance with DIN 53504
Min. longitudinal resistance to tearing - 6 N/mm
Conditions for resistance to tearing - in accordance with DIN 53515
Elongation at break/conditions - 500 % / in accordance with DIN 53504
Min. combined tension and shear resistance - 1 N/mm²
Min./max. processing temperature - 5 to 35 °C
Max. short-term temperature resistance - 120 °C
Min./max. temperature resistance - 40 to 90 °C
Min. flashing point - 70 °C
Glass transition temperature/conditions - 45 °C / in accordance with DIN 53445
Max. change in volume - 5 %
Shelf life from production/conditions - 12 Month / at 10°C to 25°C
Silicone-free - Yes
Resistance against - Water
Lime water
Public sewage
Weak acids
Weak lyes
Salt water
Short-term resistance against
Fuels

Mineral oils
Animal fat
Animal oils
Vegetable fat
Vegetable oils
Shelf life from production 12 Month

Specification

Elastic PU adhesive and sealant for a wide range of applications
Universal application
Outstanding adhesive strength on a wide range of materials and surfaces.
Approved for use with foodstuffs (ISEGA certificate)
  • Harmless to health in hardened state
  • Suitable for gluing and sealing in food processing areas
Highly elastic
  • Bonding of identical and different substances possible
  • Compensation of different material expansions
  • Absorbs vibrations and sounds
Long skin formation time
  • Allows bonding or sealing of complex components
  • Also ideal for large surfaces
  • Assembly components can be repositioned
Can be ground/painted
Following skin formation, can be mechanically machined and painted over without surface activation (perform preliminary tests to check paint compatibility).
Not corrosive
Avoids corroding the metal
Odourless
Silicon-free
Notice
Do not allow this product to come into contact with alkyd-resin paint systems. Not suitable for glass groove sealing and for expansion joints in the construction sector.
Direct sunlight may result in yellowing of the surface. Not suitable for PE, PP, PTFE, silicone, polystyrene and plastics.
Minimum adhesive thickness: 3 mm. It is essential to use Adhesion Plus products in order to achieve optimum adhesion results.
Proof of Performance
ISEGA:
Can be used where food is processed or stored, e.g. for bonding wall and floor areas in food processing companies.
Clearance certificate no.: 41958 U 16
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.